Data Sheet
Bluegiga – A Silicon Labs Company 6
BT121 overview
BT121 is a Bluetooth Smart Ready module targeted for applications that require both Bluetooth Smart and
Classic connectivity. It can connect to legacy devices that only support Bluetooth SPP or Apple
®
iAP2 profiles
as well to devices that support Bluetooth Smart. BT121 integrates a high performance Bluetooth radio, a low-
power ARM Cortex micro-controller and a Bluegiga Bluetooth Smart Ready stack software marking it
extremely easy-to-use as no RF or Bluetooth software development is needed. BT121 can be used as a
modem together with a separate host MCU, but applications can also be embedded into the built-in ARM
®
Cortex
®
MCU with the Bluegiga BGScript
TM
scripting language.
1.1 Key Features
Bluetooth features
Bluetooth 4.1 Smart Ready compliant
Master and slave modes
Up to 6 x BR/EDR connections
Up to 7 x BLE connections
1 x BR/EDR + 7 x BLE connections
simultaneously
Radio features
Integrated antenna
TX Power
o +12 dBm with Bluetooth BR/EDR
o +10 dBm with Bluetooth LE
RX Sensitivity
o -96 dBm
200-400 meter LoS range
Software features
Integrated Bluetooth Smart Ready Stack
SPP, iAP2, GATT over BR Bluetooth profiles
Any GATT based Bluetooth Smart profile
1000 kbps throughput over SPP
150 kbps throughput over iAP2
100 kbps throughput over BLE
BGAPI
TM
serial protocol API over UART for
modem usage
BGLIB
TM
host API/library which implements
BGAPI serial protocol
BGScript
TM
scripting language for standalone
usage
Profile Toolkit
TM
for creating GATT based
services
Hardware interfaces
UART host interface
2 x SPI, UART and 2 x I2C peripheral interfaces
Up to 22 x GPIO with interrupts
4 x 12-bit ADC and 2 x 12-bit DAC*
Internal temperature sensor*
Internal battery voltage measurement option*
Clock generator*
RTC with calendar*
Microcontroller
ARM Cortex M0
48 Mhz
16kB RAM
128kB flash
Electrical characteristics
Supply voltage: 2.2V to 3.6V
Supply voltage: 2.4V to 3.6V when using ADC
Environmental and regulatory
Temperature range: -40C to +85C
Bluetooth, CE, FCC and IC, Japan and South-Korea
qualified*
Dimensions:
W x L x H: 11.0 mm x 13.9 mm x 2.2 mm
*) Feature not implemented on engineering samples and engineering samples are not qualified