User's Manual

Bluegiga Technologies Oy
Preliminary – information subject to change
Page 26 of 27
L’OEM du module BLE112 ne doit utiliser que la ou les antennes approuvées énumérées dans le tableau 7,
qui ont été certifiées avec ce module.
Dans le guide d’utilisation du produit final, l’intégrateur OEM doit s’abstenir de fournir des informations à
l’utilisateur final portant sur les procédures à suivre pour installer ou retirer ce module RF ou pour changer les
paramètres RF.
7.3 CE
BLE112 is in conformity with the essential requirements and other relevant requirements of the R&TTE
Directive (1999/5/EC). The product is conformity with the following standards and/or normative documents.
 EMC (immunity only) EN 301 489-17 V.1.3.3 in accordance with EN 301 489-1 V1.8.1
 Radiated emissions EN 300 328 V1.7.1
7.4 Qualified Antenna Types for BLE112-E and BLE112-N
This device has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of the same
type and the same or less gain can be used without additional application to FCC. Table 7 lists approved
antennas for BLE112. Any approved antenna listed in table 7 can be used directly with BLE112 without any
additional approval. Any antenna not listed in table 7 can be used with BLE112 as long as detailed information
from that particular antenna is provided to Bluegiga for approval. Specification of each antenna used with
BLE112 will be filed by Bluegiga. Please, contact [e-mail]
for more information.

Item Manufacturer Manufacturerspartnumber
Measure
dGain
(dBi)
Specifie
dGain
(dBi)
MeasureTotal
Efficiency(%)
1 Pulse W1030 1
2dBi
70‐80
2 LinxTechnologiesInc ANT‐2.4‐CW‐CT‐SMA 1.3
2dBi
77
3 EAD EA‐79A 0.4
2dBi
60
4 Antenova B4844/B6090 1.4
2dBi
76‐82
5 Litecon CAR‐ATR‐187‐001 0.8
2dBi
60‐70
Table 6: Approved Antennas For BLE112-E and BLE112-N