Data Sheet

Table Of Contents
End Product Labeling
BGM220S modules are not labeled with their own FCC ID due to their size. Instead, the packaging label contains the FCC ID. In all
cases when the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the
module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a
visible area with the following:
"Contains Transmitter Module FCC ID: QOQ-BGM220S"
Or
"Contains FCC ID: QOQ-BGM220S"
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module or
change RF related parameters in the user manual of the end product.
As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for
testing their end-product for any additional compliance requirements required with this module installed.
BGM220S Wireless Gecko Bluetooth Module Data Sheet
Certifications
silabs.com | Building a more connected world. Preliminary Rev. 0.6 | 46