User's Manual

Page 7 of 7
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module or change RF related parameters in the user
manual of the end product
CE
The Declaration of Conformity may be consulted at www.silabs.com.
Please note that every application using the BGM121 or BGM123 will need to perform the
radio EMC tests on the end product according to EN 301 489-17.
The conduced test results can be inherited from the modules test report to the test report of
the end product using BGM123 or BGM121. EN300328 radiated spurious emission test must
be repeated with the end product assembly. Test documentation and software for the EN
300 328 radiated spurious emissions testing can be requested from the Silicon Labs support.