User's Manual
Table Of Contents
- 1. Feature List
- 2. Ordering Information
- 3. System Overview
- 4. Electrical Specifications
- 4.1 Electrical Characteristics
- 4.1.1 Absolute Maximum Ratings
- 4.1.2 Operating Conditions
- 4.1.3 Current Consumption
- 4.1.4 Wake up times
- 4.1.5 Brown Out Detector
- 4.1.6 Frequency Synthesizer Characteristics
- 4.1.7 2.4 GHz RF Transceiver Characteristics
- 4.1.8 Oscillators
- 4.1.9 Flash Memory Characteristics
- 4.1.10 GPIO
- 4.1.11 VMON
- 4.1.12 ADC
- 4.1.13 IDAC
- 4.1.14 Analog Comparator (ACMP)
- 4.1.15 I2C
- 4.1.16 USART SPI
- 4.2 Typical Performance Curves
- 4.1 Electrical Characteristics
- 5. Typical Connection Diagrams
- 6. Layout Guidelines
- 7. Pin Definitions
- 8. BGM113 Package Specifications
- 9. Certifications
- 10. Revision History
- Table of Contents
6. Layout Guidelines
6.1 Layout Guidelines
For optimal performance of the BGM113 Module, please follow these guidelines:
• Place the module at the edge of the PCB, as shown in the figure below.
• Do not place any metal (traces, components, battery, etc.) within the clearance area of the antenna (shown in the figure below as a
white rectangle between the pad rows).
• Connect all ground pads directly to a solid ground plane.
• Place the ground vias as close to the ground pads as possible.
• Do not place plastic or any other dielectric material in touch with the antenna.
Figure 6.1. Recommended Layout for BGM113 Module
BGM113 Blue Gecko Bluetooth
®
Smart Module Data Sheet
Layout Guidelines
silabs.com | Smart. Connected. Energy-friendly. Preliminary Rev. 0.93 | 38