Data Sheet

Bluegiga Technologies Oy
Page 51 of 52
12.5 MIC, formerly TELEC
TBD
12.6 Qualified Antenna Types for APx4-E
This device has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of a different
type or with a gain higher than 2.14 dBi is strictly prohibited for use with this device. Using an antenna of a
different type or gain more than 2.14 dBi will require additional testing for FCC, CE and IC. Please contact
[e-mail] for more information. The required antenna impedance is 50 ohms.
Qualified Antenna Types for APX4-E
Antenna Type
Maximum Gain
Dipole
2.14 dBi
Table 62 External Antenna Parameters
To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that
the equivalent isotropic radiated power (e.i.r.p.) is not more than that permitted for successful communication.