User Manual

4.6.2 Using CIFS mount

To use a CIFS mount (for example a shared folder in Windows), you need the software componentcifs-client

installed in Access Device.

First, create a mountpoint with command . Mount the directory by using command mkdir -p /mnt/cifs mount.cifs

. You will then be prompted for password<ipaddr-of-server>/sharename /mnt/cifs -o user=username,nounix

of the username you specified. After entering the correct password, you can access the share in directory

./mnt/cifs

When the share is not needed, unmount it with command umount /mnt/cifs

4.6.3 Mounting at boot time

System startup script which is editable in rc.local WWW Setup - Advanced Settings - System startup script

can be used to automatically mount remote file shares at bootup. Add the mountpoint creation and actual mount

commands in that script. If your CIFS share needs a password, it can be added to mount options, for example -o

.user=username,pass=password,nounix

4.7 Factory reset and complete system upgrade (reflash)

Bluegiga Access Devices can be returned to default settings using three ways:

Configuration reset using factory reset button (Access Point 3241 and Access Server AX4 only), useful for

example for restoring default network settings

Complete system upgrade using "reflash" WPK package (over WWW interface, SSH or with USB memory

dongle), recommended when you want to install latest software

Kernel, filesystem and configuration restore with special "Factory Reset" USB memory dongle, useful if

system has been corrupt and does not boot properly for methods above to work

4.7.1 Resetting default system configuration with factory reset button

Access Point 3241 and Access Server AX4 can be resetted to its default configuration by keeping the button in

the bottom of the device pressed while it is powered up. The device will then boot, reset system configuration

settings and restore default configuration files and reboot itself. You can also run command fromconfigreset

shell prompt to perform same reset (especially in Access Server 229x which does not have a button).

Factory reset with button press does not uninstall applications or recover deleted application files. To perform this, a factory

reset with reprogramming is required, see below.

4.7.2 Complete system upgrade (reflash)

The latest software updates and instructions are available at http://techforum.bluegiga.com

Upgrading with a reflash package, which will erase all existing information, reset all passwords to their defaults and

regenerate SSH keys.

If you have your own applications running in the Access Device you plan to upgrade, stop and backup their data first.

The easiest way to install the latest software version is to do it with a USB memory dongle:

Find the correct software upgrade packet for your Access Device's architecture (see Managing Software

for information of architectures) and copy the correct Components (wpkgd)

file to an empty USB memory dongle.reflash-[version].[architecture].wpk

Power down Access Device.

Insert the dongle in Access Device.

Power up Access Device.

Wait with the dongle inserted for Access Device to boot and the blue leds to start blinking from side to