Daim Ntawv Qhia Tus Neeg Siv

Si826x-EVB
Rev. 0.1 7
4. Open Loop POL Evaluation Board
The power and jumper connections descriptions are summarized here:
P1 External input signal connections to drive the LED Emulator.
P2 External output signal and VDD connections.
JP1 Jumper when installed bypasses the external bootstrap circuitry.
JP2 Jumper when installed used to accommodate common-anode drive.
JP3 Jumper when installed can be used to enable the fast reverse recovery diode.
JP4 Jumper when installed can be used to add additional load to output.
JP5 Jumper when installed can be used to bypass the output gate resistor.
JP6 Jumper when installed used to accommodate common-cathode drive.
4.1. Voltage and Current Sense Test Points
The Si826x evaluation board has several test points. These test points correspond to the respective pins on the
Si826x integrated circuits as well as other useful inspection points. See Figures 7 through 10 for a silkscreen
overview. See schematics in Figures 11 through 14 for more details as well.
Figure 7. Si826x DIP8 Evaluation Board Silkscreen
Figure 8. Si826x SOIC8 Evaluation Board Silkscreen
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.