Daim Ntawv Qhia Tus Neeg Siv

C8051F35x-DK
10 Rev. 0.4
DOCUMENT CHANGE LIST
Revision 0.1 to Revision 0.2
Section 1, added USB Debug Adapter and USB
Cable.
Section 2, changed name from "Hardware Setup" to
"Hardware Setup using an EC2 Serial Adapter".
Section 2, added 2 Notes bullets.
Section 2, removed Note from bottom of page.
Added Section 3, "Hardware Setup using a USB
Debug Adapter".
Section 5.4.2, changed step 2 to include new
instructions.
Section 7, J4, changed "Serial Adapter" to "Debug
Adapter".
Target Board DEBUG Interface Section, added USB
Debug Adapter.
DEBUG Connector Pin Descriptions Table, changed
pin 4 to C2D.
Changed "jumper" to "header".
EC2 Serial Adapter section, added EC2 to the
section title, table title and figure title.
EC2 Serial Adapter section, changed "JTAG" to
"DEBUG".
Added "USB Debug Adapter" section.
Section 7, J8, changed "Serial Adapter" to "USB
Debug Adapter"
DEBUG Connector Pin Descriptions Table, changed
pin 10 to USB Power
USB Debug Adapter Target Board Power Connector
(J8) Section, changed "Serial" to "USB Debug"
Revision 0.2 to Revision 0.3
Removed EC2 Serial Adapter from Kit Contents.
Removed Section 2. Hardware Setup using an EC2
Serial Adapter. See RS232 Serial Adapter (EC2)
User's Guide.
Removed Section 8. EC2 Serial Adapter. See
RS232 Serial Adapter (EC2) User's Guide.
Removed Section 9. USB Debug Adapter. See USB
Debug Adapter User's Guide.
Revision 0.3 to Revision 0.4
Updated "Software Setup‚" on page 2.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.