User guide

75
configuration is Mirrored, Mirrored Striped or Parity RAID, and the “Advanced
RAID Features” checkbox in the Configuration/Advanced Options dialog box is
checked.
Parity
Click the radio button to toggle the state of rebuild ability without taking the
volume off-line. This selection is only available when the selected RAID
configuration is Parity RAID and the “Advanced RAID Features” checkbox in the
Configuration/Advanced Options dialog box is checked.
Devices
Select the RAID member devices from the available device segment grid. Up to
five members can be selected for Contiguous, Concatenated, Mirrored, Striped or
Parity RAID modes (although Mirrored RAID Groups will typically contain only two
members). Exactly four members must be selected for Mirrored Striped mode.
Pass-Thru devices will appear with a highlighted background color.
3. If you selected Concatenated in the Configuration field, enter values for individual segment sizes for each
disk and click Create to create the RAID Group.
4. If you selected Pass-Thru devices as part of the this RAID Group, the following warning appears:
If you want to proceed with creating the RAID Group (which will destroy any existing data that is stored on
the Pass-Thru device, select Yes. Otherwise, select No to return to the Create RAID Group dialog.
5. When you are finished, press Cancel to close the Create RAID Group dialog box.