User guide

27
Table 10 Toolbar Buttons on the Advanced Configuration Wizard
Button Tooltip Description
Read a configuration
from a file
Write configuration for
system to a file
Restore configuration
to last Commit
Create a new volume
Reads a saved configuration into the Advanced Configuration
Wizard so you can apply the configuration to the SiI 4726
Storage Appliance. Available in Basic and Advanced modes.
Saves a configuration
to a file on the host computer. Available
in Basic and Advanced modes.
Cancels proposed changes. Available in Basic and Advanced
modes.
Creates a new volume on which to set the storage policy and
capacity. You can create up to 2 volumes on each hard disk
drive (10 total).
Edit selected volume
Permits the storage policy and capacity of an existing volume to
be modified.
Delete selected volume Deletes the volume that is currently selected in the volume list.
Delete all volumes Deletes all configured volumes.
Copy configuration from
other device in the system
Copies the configuration of one SiI 4726 Storage Appliance to
the current SiI 4726 Storage Appliance.
Table 11 Command Buttons on the Advanced Configuration Wizard
Button Description
To Basic Mode Opens the Basic Configuration Wizard.
When configuring a volume (create a new volume or edit a selected volume)
Update Volume
Applies the selected storage policy to a specific portion of a hard disk drive as a
proposed configuration.
Cancel
Aborts the pending changes and returns the Wizard to the point where you can
perform different advanced configuration functions
.
After configuring a volume
Apply
Submits configuration changes to the SiI 4726 Storage Appliance, closes the
Wizard, and displays the updated configuration on the Status window.
Cancel Aborts the in-progress changes and closes the Wizard.