User guide

26
A Look at the Advanced Configuration Wizard
The Advanced Configuration Wizard is an extension of Basic mode that allows you to create two
volumes
(virtual drives) on each physical hard disk drive.
Storage
Policy
Drive
Graph
Volume
List
Advanced
Controls
Table 9 Sections of the Advanced Configuration Wizard
Section Description
Storage
Policy
Volume
List
Drive
Graph
Advanced
Controls
Shows the available storage policies that you can assign to volumes. The
options are enabled after you create a new volume or select an existing
volume to edit.
Shows Volume, Mode (storage policy), and Size details for currently configured
volumes. Select a volume to edit or delete it. The Total GB’s Left field beneath the
volume list shows the remaining capacity in gigabytes for all the hard disk drives.
Displays disk space for each hard disk drive. All space allocated to the same
volume appears in a matching color. A hatch pattern indicates a proposed
configuration and a solid block indicates an existing volume.
Permit volume creation and modification on each hard disk drive:
• Hot Spare check box indicates space on this drive is allocated as rebuild
space for the selected SAFE volume.
• ‘Use’ check box indicates drive membership within a volume.
• Slider specifies capacity allocated to a volume.
• Text field shows the capacity specified by manipulating the slider.
• ‘Cap’ field shows maximum capacity for the hard disk drive.
• ‘Vol#’ shows the virtual volume with which each hard disk drive is associated.