User guide

20
Status Cells Description
System Status section
Temp Indicates the current temperature of the SiI 4726 Storage Appliance.
Fan Speed Indicates the system fan status. Use this data to monitor possible malfunctions.
Drive Status section
Box Status
Shows the drive status
: Normal, Rebuilding, Unplugged, Needs Rebuild, New
Drive, Wrong Slot.
Drive S/N Shows the unique serial number assigned by the disk manufacturer.
Shows the expected serial number of the hard disk drive. The daemon compares
Exp. S/N
the Expected and actual Drive serial numbers to detect when a drive’s
status changes.
Capacity Information section
Policy Shows the storage policy configured for each volume.
Tota Shows the combined capacity of the volume.
Drive # Shows capacity information for each hard disk drive.
Capacity Shows the full amount of storage space (in GB) available on each hard disk drive.
Volume Shows the total volume capacity and the drive capacities assigned to each
volume.
Table 2 File Menu on the Status Window
File Menu Item Description
Change Password Opens a dialog to establish a new password.
Scan Devices Refreshes the status details presented on the Status window.
Change Connections Opens a dialog to make remote connections
.
Table 3 Edit Menu on the Status Window
Edit Menu Item Description
Configure Box
Opens the Basic Configuration Wizard
. From there, the
end-user can access the Advanced Configuration Wizard
.
Specify Policy Opens the Rebuild Policy dialog.
Specify Email Notification Sends email notification for the selected items.
Event Log Opens the Event Log
viewer.
Specify Firmware Opens the Firmware Selection
dialog.