User guide

13
4. Click Disk Management under Storage to view the disk drives.
5. If an Initialize and Convert Disk Wizard dialog appears, click Cancel to close the Wizard
and proceed to Disk Management.
6. Verify that all five drives are visible in their preconfigured and unallocated state. If the host does
not see the SiI 4726 hard disk drives, refer to the Troubleshooting section for corrective actions.
The Status window provides details of the volume allocation. A sixth disk appears without capacity
in the list to represent the SteelVine processor. Do not initialize or partition this SteelVine disk.
Do not
initialize or
partition the sixth
(last) SteelVine
disk.
Mac OS X
1. Plug the SiI 4726 Storage Appliance into an AC power outlet and turn the SiI 4726 power switch to
ON.
2. Attach the SiI 4726 Storage Appliance to the SV-HBA3124 with an external SATA cable.
3. A warning appears. Because the SiI 4726 ships with empty drives, Mac OS X does not identify
a recognizable file system. Click Ignore as many times as needed to dismiss the message
boxes.
Note: This warning will show up every time you reboot the Mac system. This pop-up
warning will be displayed for the config drive. Ignore this as functionally it has no impact.