User guide

106
Rebuild RAID1 Set
Rebuilding a RAID1 set copies data from an existing drive to a replacement drive that has been installed in a
RAID1 set. Take this action if any member of the RAID1 set fails.
1. Select Rebuild Raid1 set from the Main Menu section of the RAID Configuration Utility screen.
2. Select the RAID1 set to rebuild from the Logical Drive list and press Enter.
3. When the Are You Sure? confirmation prompt appears, respond Y to rebuild the RAID1 set. The
set is rebuilt. A progress indicator appears in the Main Menu section during the rebuild.