User guide

ezRAID3 Manager GUI Version 1.0
Linux
Use the following procedure to launch the SteelVine Manager on a Linux system.
1. Change to the directory in which the SteelVine Manager GUI and daemon software
was installed (such as
/usr/local/SiliconImage)
2. Start the daemon by entering the command:
./SiI57XX -e
3. Open a new terminal window and start the GUI by entering the command:
./SiI57XXUI
<need a screen capture when the Linux version is available>
ezRAID3 RAID Manager User's GuideT
Page 22