User guide

ezRAID3 Manager GUI Version 1.0
The “SysFanSpeedLo”, “SysFanSpeedHi”, “PwSupFanSpeedLo” and
“
PwSupFanSpeedHi” keywords allow you define the high and low threshold values for the
system and power supply fans, measured in tachometer clicks per revolution. Any values
that are detected outside of these ranges will cause the SteelVine Manager Status Window to
indicate those values as warning conditions.
<SysFanSpeedLo>100</SysFanSpeedLo>
<SysFanSpeedHi>255</SysFanSpeedHi>
<PwSupFanSpeedLo>100</PwSupFanSpeedLo>
<PwSupFanSpeedHi>255</PwSupFanSpeedHi>
If an invalid value is detected in the XML tag value, a pop-up window will appear notifying
you of the error and the tag where it can be found.
Note: If the UserConfig.xml file is missing, the SteelVine Manager GUI will revert to all Silicon Image
default values.
Creating a Splash Screen
You can further customize the SteelVine Manager by creating your own splash screen.
1. Create the logo for your splash screen – there are no image size limitations
2. Save the logo as ‘
userlogo.xpm’
x The .xpm file type is a UNIX-based X PixMap format
3. Put the userlogo.xpm file in the following location:
C:\Program Files\Silicon Image\57XX SteelVine\SiI Config
The splash screen will be displayed for two seconds each time you starts the SteelVine
Manager.
ezRAID3 RAID Manager User's Guide
Page 84