User guide

ezRAID3 Manager GUI Version 1.0

Set Up a Remote Connection

1. In the Status Window, select Change Connection from the File menu.

2. Enter the host name or IP address of the host computer on which the daemon is

installed and enter the default port number of 51116.

3. Click

OK.

The user interface establishes the requested connection and displays information

gathered by the remote daemon in the Status Window

Note: The host name or IP address is not saved across sessions.

Install New Firmware

1. Select Specify Firmware from the Edit menu of the Status Window or click the

Specify Firmware toolbar button.

ezRAID3 RAID Manager User's Guide

Page 78