User guide

ezRAID3 Manager GUI Version 1.0
2 Getting Started
Starting the SteelVine Manager
Before you begin, be sure that the SteelVine Manager software has been installed according to
the instructions in the
Quick Installation Guide for your host computer type.
MS Windows
Click Start Æ Program Files Æ Silicon Image Æ 57XX SteelVine Æ SteelVineManager.
Once started, the SteelVine Manager Application icon can be found in the Notification Tray
located at the bottom right hand corner of the screen. Double click the notification tray icon to
open the SteelVine Manager GUI status window. The SteelVine Manager icon remains active in
the notification tray even if you close the SteelVine Manager window. It can be closed by
right-clicking on the icon and selecting “
Exit”.
The SteelVine Manager starts with the Status Window visible so you can monitor the SteelVine
Storage Reference Designs connected to the host computer. Up to four SteelVine Storage
Reference Designs can be managed through a single session. When the SteelVine Storage
Reference Design is set to GUI mode, you can access the Basic Configuration Wizard from the
Status window. From there, you can optionally use the Advanced Configuration Wizard to
create multi-volume configurations.
ezRAID3 RAID Manager User's Guide
Page 19