User guide

ezRAID3 Manager GUI Version 1.0
11 Backup Button
Overview
The Backup Button feature allows you to launch a pre-selected third-party software
application by pressing a special-purpose push-button on the SteelVine Storage Reference
Design (different from the mode change push-button used to create a new Storage Policy).
Direct support is available for the Retrospect Express backup application from EMC
Corporation (version 6.5 or later), although you configure this feature to launch any other
application program by specifying its command-line syntax.
Accessing the Backup Button Dialog
The Backup Button dialog allows you to select the application that should be associated with
the Backup Button on the SteelVine Storage Reference Design. Use the following procedure
to access the Backup Button dialog.
1. Click on the
Backup Button icon along the top of the SteelVine Manager Status
Window.
Backup
Button icon
2. When prompted, enter the administrator password. The default password is admin.
3. The Backup Button dialog will appear. Refer to the following sections depending on
which backup application software you want to use with the Backup Button.
ezRAID3 RAID Manager User's Guide
Page 71