User guide

ezRAID3 Manager GUI Version 1.0
ATAPI Device Limitations
The following limitations apply when connecting an ATAPI device to a SATA port of the
SteelVine storage processor:
x ATAPI devices are only supported in the JBOD mode; they are not supported in
virtual drive configurations.
x The GUI communication requires that the SteelVine storage processor be
configured as JBOD with a hard disk drive connected to SATA port 0 and an
ATAPI device connected to SATA port 1.
x The GUI will not communicate with the SteelVine storage processor when in
JBOD configuration and only ATAPI devices are connect to one or both of the
SATA ports on the SteelVine processor.
ezRAID3 RAID Manager User's Guide
Page 18