User guide

ezRAID3 Manager GUI Version 1.0
Verify Rebuild
To confirm that the two hard disks that comprise a SAFE volume are exact copies, you can
also execute a Verify Disk task manually.
When the SteelVine Storage Reference Design is powered on and you select “Start Verify”,
there is a 60 second delay. The “
Start Verify” selection will be disabled during this time.
Otherwise, if the drive is in normal or verify abort mode, you can manually start the verify
operation.
A pop-up will inform you of the action taking place.
Abort Rebuild
To abort a rebuild process that is already active, select Action Æ Abort Rebuild. The
rebuild process will be terminated, and the SAFE volume will remain in a degraded
(vulnerable) state until the rebuild is restarted and allowed to complete.
ezRAID3 RAID Manager User's Guide
Page 57