User guide

ezRAID3 Manager GUI Version 1.0
Mac OS X
Important: Before reconfiguring a volume, back up your data and drag the old drive to the trash to
un-mount previously defined SteelVine Storage Reference Design partition. If no hard drives are
connected to the Storage Appliance, the SteelVine Processor disk (8.0 GB Config Disk Media) will
appear. Do not remove or modify that partition. After you configure and partition the new volumes,
restore the backed-up data to the new configuration.
1. Launch Disk Utility from the Application > Utilities folder.
2. Select a configured disk and click the Partition tab. This procedure illustrates the
BIG Storage Policy configuration, which concatenates the capacity of all hard drives
connected to the SteelVine Storage Reference Design.
2
4
5
6
3
7
3. Select 1 Partition from the Volume Scheme drop-down list.
4. Enter a name for the volume in the
Name field (such as “My BIG disk”.)
5. Select
Mac OS Extended (journaled) from the Format drop-down list.
ezRAID3 RAID Manager User's Guide
Page 52