User guide

ezRAID3 Manager GUI Version 1.0
7. Select the FAST radio button in the Storage Policy section.
Note: Only the Storage Policies that are supported by your specific SteelVine Storage
Processor chip-type will appear in the list.
8. Select the Use check box below both Drive 0 and Drive 1 because FAST volumes are
striped across two hard drives.
9. Verify the sliders below both drives automatically moved all the way to the right to
allocate the remaining capacity on the two drives to the
FAST volume.
Note: You can allocate less than the total remaining capacity to the second volume. If you
do that, however, the capacity is unavailable and unused.
10. Click Update Volume.
10
8
9
7
ezRAID3 RAID Manager User's Guide
Page 43