User guide

ezRAID3 Manager GUI Version 1.0
Figure 11 - Basic Configuration Wizard
Table 7 - Sections of the Basic Configuration Wizard
Wizard Section Description
Storage Policy
Identifies available SteelVine Storage Policies
to assign to the SteelVine
Storage Reference Design configuration.
Volume List
Shows Volume, Mode (storage policy), and Size details for logical volumes.
The “Total GB’s Left” field (below the volume list) shows the remaining
capacity in gigabytes for all hard drives.
Drive Graph
Displays disk space for each hard drive. Storage capacity that is allocated to
the same volume appears in a matching color. A hatch pattern indicates a
proposed configuration and a solid block indicates an existing volume.
The “Cap” field (below each drive in the drive graph) shows the maximum
capacity in gigabytes for that hard drive.
Table 8 - Toolbar Buttons on the Basic Configuration Wizard
Button Tooltip Description
Read a configuration from
a file
Reads a saved configuration
into the Basic Configuration
Wizard so you can apply the configuration to the SteelVine
Storage Reference Design.
Write configuration from
system to a file
Save a Configuration File
to a file on the host computer.
Restore configuration to
last commit
Cancels proposed changes.
Volume
List
Drive
Gra
p
h
Storage
Policy
ezRAID3 RAID Manager User's Guide
Page 27