User guide

ezRAID3 Manager GUI Version 1.0
3 Basic Configuration
This section describes the Basic Configuration Wizard and explains how to configure
volumes (virtual drives).
A Look at the Basic Configuration Wizard
The SteelVine Storage Processors provide several methods for defining the configuration.
When the rotary switch (found on the back of the device) is set outside the visible presets
[SAFE, SAFE33, SAFE50, FAST, BIG or JBOD], the Basic Configuration Wizard is
accessible from the Status Window
. When the rotary switch is set to one of the default
settings, the configuration screen and options are not accessible and the volumes are defined
based upon a selected storage policy. You cannot modify the volume counts or the
capacities.
To access the Basic Configuration Wizard, click on the
Configure Box icon along the top of
the SteelVine Manager Status Window
.
Configure
Box icon
To protect against unintended changes, the SteelVine Manager prompts for a password the
first time you access the Wizard. Enter the administrator password. The default password is
admin. (See Change the Password on page 74 for additional information on password
management.)
The Basic Configuration Wizard dialog will appear (see Figure 11 below).
ezRAID3 RAID Manager User's Guide
Page 26