User guide

ezRAID3 Manager GUI Version 1.0
Table 5
- Action Menu on the Status Window
These selections are only available if one or more SAFE volumes have been configured on the system.
Edit Menu Item Description
Start Rebuild Initiates a Rebuild to the target drive
Start Verify Initiates a Verify activity on the selected drive
Abort Rebuild
Abort the rebuild process (only selectable when a Rebuild operation is
active)
Abort Verify
Abort the Verify process (only selectable when a Verify operation is
active)
Table 6 - Toolbar Buttons on the Status Window
Button Tooltip Description
Configure Box
Opens the Basic Configuration Wizard.
(appears only when using GUI Configuration mode)
Schedule Disk Verify
Schedule a disk Verify activity.
(appears only when one or more SAFE volumes exist)
Configure Pop-Ups Configure the Pop-Up messages.
View Policy Settings
Shows the Rebuild Policy settings that are defined by the GPI
pins (appears only when one or more SAFE volumes exist)
Show Event Log View the Event Log.
Specify Firmware
View the current version or download an updated version of
the SteelVine Storage Processor firmware.
Email Notification Configure the operation of email message notification.
Backup Button
Configure the third party backup application that should be
launched when the Backup Button is pressed on the SteelVine
Storage Reference Design.
Drive Locking
Enable/disable the hard drive data security mechanism (not
implemented yet).
ezRAID3 RAID Manager User's Guide
Page 25