User guide

ezRAID3 Manager GUI Version 1.0
Status Cells Description
Drive S/N Shows the unique serial number assigned by the disk manufacturer.
Exp. S/N
Shows the expected serial number. The SteelVine Storage Reference Design
compares the expected and actual drive serial numbers to detect when a drive’s
status changes.
Security
Shows the status of the Drive Locking security feature (refer to Chapter 10 Drive
Locking on page 66 (not implemented yet).
Capacity Information Section
Policy Shows the storage policy configured for each volume.
Total Shows the combined capacity of the volume.
Drive # Shows capacity information for each hard drive.
Capacity Shows the amount of storage space (in GB) available on each hard drive.
Volume Shows the total volume capacity and the drive capacities assigned to each volume.
Table 3 - File Menu on the Status Window
File Menu Item Description
Change Password Opens a dialog to establish a new password.
Scan Devices Refreshes the status details presented on the Status window.
Change Connections Opens a dialog to make remote connections.
Quit Exits the SteelVine Manager GUI (Windows systems only)
Table 4 - Edit Menu on the Status Window
Edit Menu Item Description
Configure Box Opens the Basic Configuration Wizard.
Schedule Disk Verify
Schedule a disk Verify activity
(enabled only in SAFE, SAFE33 or SAFE50 modes)
Configure Pop-Ups Configure the Pop-Up messages.
View Policy Settings
Display the Rebuild policy settings
(enabled only in SAFE, SAFE33 or SAFE50 modes)
Setup Email Notification Opens the Setting-up Email Notification dialog.
Event Log Opens the Event Log viewer.
Specify Firmware Opens the Firmware Selection dialog.
Backup Button Open the Accessing the Backup Button Dialog dialog.
Drive Locking
Opens the Accessing the Drive Locking Dialog
dialog.
(not implemented yet)
ezRAID3 RAID Manager User's Guide
Page 24