User guide

ezRAID3 Manager GUI Version 1.0
Introducing the SteelVine Manager
The SteelVine Manager starts with the Status window visible so you can monitor the
SteelVine Storage Reference Designs. The Status-only mode is entered when the rotary
switch is in the JBOD, BIG, FAST, SAFE, SAFE33, or SAFE50 mode. In Status only mode,
you are not permitted to change the configuration from the GUI. The only possible way to
change the configuration is to change the rotary switch setting.
Configure
Box
Schedule Disk
Verify
Configure
Popups
Configure
Email Notification
Event
Log
View
Policies
Specify
Firmware
Backup
Button
Drive
Locking
System
Status
Drive
Status
Table 2 - Sections of the Status Window
Status Cells Description
Topology Section
Tree View
Shows the hierarchical structure of multiple SteelVine Storage Processors when
using Cascading (only the top-level node is shown in the initial release)
System Status Section
Temperature
Indicates the current temperature of the SteelVine Storage Reference Design. The
field displays “N/A” if there is no temperature sensor installed in your storage
enclosure.
Fan Speed
Indicates the system fan state. The field displays “N/A” if there is no fan speed
sensor installed in your storage enclosure.
Drive Status Section
Box Status
Shows the drive state: Normal, Rebuilding, Verifying, Unplugged, Needs Rebuild,
New Drive, Wrong Slot, Use Bigger Drive, Mismatch, Not Readable or
Unavailable.
Drive
Information
Box Serial
Number
Tree View
Capacity
Information
Volume
Information
ezRAID3 RAID Manager User's Guide
Page 23