User`s guide

Document Number: MAN-002000-000 Version 2.6
Sil 4726 Manager User’s Guide
Page 59
12 Monitor and Troubleshooting
This chapter describes Status window color codes, LED indicator states, and event log messages that are used to
troubleshoot the SiI 4726 Storage Appliance.
Monitor the SiI 4726 Storage Appliance
Monitor drive status
The color of the drives in the Status window indicates the status of the hard disk drives.
Table 12 Drive Status
Color State Definition Resolution
Green
Normal Drive is active.
Red
Needs Rebuild
Drive is in a failed state. That is, a write has
occurred to a SAFE volume while the disk drive
was offline.
Replace the failed
hard disk drive.
Gray or
Red
Unplugged
Drive is offline or unplugged. The background
will appear red after a write to the volume.
Verify the disk is
securely in the bay.
Otherwise, replace as
necessary.
Light Blue
New drive New drive.
Yellow
Rebuilding Drive is being rebuilt.
Purple
Wrong slot
There is a mismatch between the Serial # and
Expected Serial # because a hard disk drive has
been installed into the wrong bay.
Install the correct disk
drive into the bay.