User`s guide

Document Number: MAN-002000-000 Version 2.6
Sil 4726 Manager User’s Guide
Page 31
10. Select the FAST radio button in the Storage Policy section.
11. Select the ‘Use’ check box beneath both Drive 0 and Drive 1. This example illustrates two-drive
striping.
12. Move the slider beneath Drive 0 all the way to the right to allocate the remaining capacity on the two
drives to the Fast volume.
If you wish, you can allocate less than the total remaining capacity to the new volume. However, doing
so makes the unallocated capacity unavailable and unused.
13. Click Update Volume.
11
12
10
13