User`s guide

Document Number: MAN-002000-000 Version 2.6
Sil 4726 Manager User’s Guide
Page 10
5. Verify that all five drives are visible in their pre-configured and unallocated state. If the host does not
recognize the SiI 4726 hard disk drives, refer to the Troubleshooting section for corrective actions.
A “320.0 KB Config Disk Media” disk appears in the list of hard disk drives to represent the SteelVine
processor. Do not initialize or partition the “320.0 KB Config Disk Media” disk.
Note: Do not initialize or partition the “320.0 KB Config Disk Media” drive.
Mac OS X recognizes five 152.7 GB hard disk drives for an SiI 4726 Storage Appliance in
JBOD (bypass mode) populated with five 160GB hard disk drives.
The SiI 4726 Manager searches for an active daemon and launches a daemon process if the daemon is
not active. This application also launches the SiI 4726 Manager to display the information captured by
the daemon.
The daemon launch script is also added to the Library/StartupItems/SiI 4726Daemon directory to
launch the daemon every time Mac OS is started.
Note: The daemon has “root user” privileges.
Check www.steelvine.com
for updated software and manuals. Install a new version of the SiI 4726 Manager if
needed. See the “Quick Install Guide” for details.
Do not initialize
or partition the
320.0KB Config
Disk Media