User`s guide

M
on
i
tor an
d
T
rou
bl
es
h
oot
i
ng
54
This chapter describes Status window color codes, LED indicator states, and event log messages
that are used to troubleshoot the SiI 4726 Storage Appliance.
Monitor the SiI 4726 Storage Appliance
12
Monitor drive status
The color of the drives in the Status window indicates the status of the hard disk drives.
Table 12 Drive Status
Color State Description Resolution
Green
Normal
Drive is active.
Red Needs Rebuild
Drive is in a failed state. That is, a write has
occurred to a SAFE volume while the disk
drive was offline.
Gray or
Red
Unplugged
Drive is offline or unplugged. The
background will appear red after a write to
the volume.
Verify the disk is
securely in the bay.
Otherwise, replace
as necessary.
Light
Blue
New drive New drive.
Yellow Rebuilding Drive is being rebuilt.
Purple Wrong slot
There is a mismatch between the Serial #
and Expected Serial # because a hard disk
drive has been installed into the wrong bay.
Install the correct
disk drive into the
bay.