User`s guide

Document Number: MAN-000SR5-000 Revision 1.40
Rebuild RAID1 Set
Rebuilding a RAID1 set copies data from an existing drive to a replacement drive that has been installed in a
RAID1 set. Take this action if any member of the RAID1 set fails.
1. Select
Rebuild Raid1 set from the Main Menu section of the RAID Configuration Utility screen.
2. Select the RAID1 set to rebuild from the Logical Drive list and press
Enter.
3. When the
Are You Sure? confirmation prompt appears, respond Y to rebuild the RAID1 set.
The set is rebuilt. A progress indicator appears in the Main Menu section during the rebuild.
SATARAID5 Management Software User's Guide
Page 42