User`s guide

Document Number: MAN-000SR5-000 Revision 1.40
4. Select the size of the RAID set with the ↑ and ↓ keys and press Enter.
5. When the
Are You Sure? confirmation prompt appears, respond Y to complete the RAID Set
configuration.
Note: If you have excess capacity left on the hard drives after creating a RAID set in the
BIOS RAID utility, you can later go to the SATARAID5 Manager GUI to create additional
logical drives that fully utilize the capacity of all hard drives.
SATARAID5 Management Software User's Guide
Page 39