User`s guide

Document Number: MAN-000SR5-000 Revision 1.40
Creating RAID Groups (Sets)
Select from RAID0, RAID1, and JBOD configurations when creating a new RAID group. Select a RAID
level based on factors such as performance, data security, and number of drives available. Consider the long-
term role of the system and plan the data storage strategy appropriately.
1. Select
Create RAID set from the Main Menu section of the RAID Configuration Utility screen.
2. Select
RAID0 (Striped) or RAID1 (Mirrored) and press Enter.
Note: Procedures to create a JBOD configuration or a spare drive for a RAID1 set are
documented separately. See Creating a JBOD Configuration and Creating a Spare Drive for
a RAID1 Group.
SATARAID5 Management Software User's Guide
Page 37