User manual

4.3.3 Create Spare

This command displays a dialog box to let user create Spare Drive, user needs to select the following parameters:

Spare Type: Global -- the spare drive is for all RAID groups in the system.

Dedicated -- the spare drive is dedicated to the specified RAID group.

RAID Group: Select the RAID group to which this spare drive is dedicated. This parameter is enabled only when

Dedicated spare type is selected.

Capacity: Select from a list of spare drive size, current options are from 128 MB to 100 GB and MAX.

Device: Select one device segment from the available device segment list

4.3.4 Delete Spare

This command displays a dialog box to let user choose one or more Spare Drives to delete.

4.3.5 Delete Member

This command displays a dialog box to let user choose RAID groups’ members to delete. Since RAID 0 is not fault-tolerant,

RAID 0 members will not be shown in the list.

Note: delete RAID group member will reduce the RAID group to be a non-fault-tolerant RAID group.