User manual

Copyright © 2004 Silicon Image Inc. SATARAID5 User’s Manual
16
RAID Level Min # of
Disks
0 2
1 2
5 3
*
10 4
*
JBOD 1
Concatenated 1
Once all parameters have been selected, select “Create” to create the RAID Group. When finished, press Cancel to exit the
Create RAID Group Dialog.
4.2.1 Concatenated RAID Groups
Concatenated RAID Groups allow the user to select different sized segments for each member of the volume. For
Concatenated volumes only, a second dialog box will appear allowing the user to select the individual segment sizes from each
disk. Enter the desired values and press Create to create the RAID Group.
4.3 Additional Menu Commands
The Main menu commands are shown below
File Device RAID Group Window Legacy
Support
Help
Configuration
…
Create Spare Create RAID
Group
Task Manager Create Legacy
RAID Group
Help Topics
Exit Delete Spare Rebuild RAID
Group
Event Log Rebuild
Legacy RAID
Group
About
Delete
Member
Delete RAID
Group
Resources Delete Legacy
RAID Group
Delete Orphan RAID Group
Summary
Convert
Legacy RAID
Group
Device
Summary
Create Legacy
Spare
Delete Legacy
Spare
Convert
*
For 3132, this requires the use of a Port Multiplier device to access more than one disk per SATA channel.