User manual

Choose the Typical setup type and click Next. When the installation completes, click Finish. Restart the computer when

prompted.

3.4 Installing Manually

To manually install individual components of the SATARAID5 software, please refer to the following sections.

3.4.1 Driver

The SATARAID5 driver can be installed using the normal Windows

driver install/upgrade interface. To begin, insert the CD-

ROM into the CD drive. If a new Si3132 Host Bus Adapter has been inserted into the system or this is the first time you are

installing the SATARAID5 software, Windows will open a “New Hardware Detected” Dialog. Follow the instructions and choose

“Install the software automatically (Recommended)”.

If a previous version of SATARAID5 is installed, the install driver dialog can be started as follows:

From My Computer icon: Right click on My Computer and select Manage. Click on “Device Manager”.

From Control Panel: Select “System” and click on the “Hardware” tab at the top of the dialog. Select “Device Manager”