Use and Care Manual

8
6
1
5
2
7
3
4
Operating Instructions
FEATURES
5
Installation Instructions
PREPARING THE ENCLOSURE (continued)
Important: The listed depth requirement for the installation is assuming that the electrical outlet is located in the adjacent
cabinetry or is fl ush mounted in the rear wall, not surface mounted in the enclosure.
1. Tempered Glass Door: Low-E glass, which
refl ects heat and energy.
2. Interior light: Illuminates both compartments of
the wine cooler.
3. Full extension shelves : Sturdy stainless steel
tracks extend fully outside of the cabinet.
4. Electronic Control: Allows the user to individ-
ually set and regulate the temperature of each
compartment.
5. Magnetic Door Gaskets: Tight fi tting seals
maintain the internal temperature.
6. Handle
7. Front Mounted Exhaust: Allows for integrated
(built-in) applications.
8. Leveling Legs: In the event the fl oor is not lev-
el, the leveling legs allow adjustments to ensure
the unit is always plumb and level.
Fig 2
}
}
}
}
69
8
/16
”
/
176.5cm
28
11
/16
/
72.9cm
Electrical
Access:1-1/2 ”/
3.81cm
23
3
/4
”
/
60.1cm min
Cabinets
must be
square
and
plumb
”
Clearance
2.5” /
6.5 cm