Install Manual

Document Number: MAN-SFO-15 | SAFETY AND INSTALLATION MANUAL FOR PHOTOVOLTAIC MODULES

Fig. 4a: cross section

of a mounting clamp

to be used for at-

taching the modules

to support structure

(minimum length is

40 mm).

Fig. 4d: end of module

row with additional

spacer (item 05: 50mm x

30mm x 24mm)

Fig. 4c: modules at-

tached to supporting

structure – side view

Fig. 4b: modules attached

to supporting structure

(rail, item 01) using a clamp

(item 02) xed with a bolt

(item 03) and nut (item

04) – view between two

modules.

1 Rail 2 Clamp 3 Bolt 4 Nut

DETAIL A

Bonding Pins

(Module Frame Bonding)

Bonding Bolt

(Rail Bonding)

Fig. 4e: CAMO hidden

end clamp. Clamp

slide into rail channel

and the bonding pins

contacts the module

ange edge.