Datasheet

Appendix B
Console Commands
The following tables describe the console commands available from the internal command console.
Access the command console through the serial port (J1), console port (JP1) or over the network using a
Telnet session or a web browser.
Wireless and Network Security Commands
The following group of commands configures network parameters.
Table 35 Network Commands
Command Description
SH NW Displays summary network information
Sample output:
WiFi Mode = INFRASTRUCTURE
WiFi SSID: silex
Speed = 11
Regulatory Domain = 704
WiFi FW Ver = 1F 1.7.1
AP density = LOW
TTLS is Disabled
WEP is Disabled
Link DOWN
SH NW SQ Display wireless network signal quality
Sample Output::
Signal Quality = 93
Signal Strength = 53
Noise Level = 135
Part Number 40183-101 Silex SX-550 Developer's Guide Page 82