User's Manual

Section 5 Troubleshooting
WindConnect II Printer Adapter with Bluetooth Technology User’s Guide -- Document #40xxx-110 Rev. X3 5-7
LED Status
Indicators
State Bluetooth
LED (blue)
Power/Status LED
(green/amber)
Description
Power on self test
Slow Blinking Blinking Green Blinks for the duration of the power on self-test.
Ready
N/A Solid Green Self-test passed. Device ready.
No connection or
activity with Bluetooth
technology
Slow Blinking N/A Device is waiting for a connection – no
connection is currently established.
Connection with
Bluetooth technology
Solid N/A Connection established.
Activity (RX or TX)
Rapid Blinking N/A Blue LED blinks rapidly during link activity.
Printer I/O activity/self
test page
N/A Blinking Green USB or 1284 (parallel port) activity.
Printer adapter error,
Self test failure, Flash
update failure, USB
overcurrent
N/A Blinking Amber Any firmware or hardware failure not covered by
other states.
Failure to communicate
with printer (I/O error)
N/A Solid Amber Printer communication error.
Configuration/Firmware
update mode
N/A Amber/Green toggle Bi-colored LED toggles while in configuration
mode and while the flash memory is being
reprogrammed.