Network Card User's Manual

Console Commands silex Page 67
Part Number 40183-101
Command Description
[service_num] provided, parameters for all services are displayed.
The command SH SERVI displays the same data as SHOW SERVI SUM.
String Commands
Table 43 String Commands
Command Description
SET STRing Set service string table entry
String 1 to11 cannot be set or changed.
Sample output:
SET STRing <string #> ”value”
CL STRing Clears the service string table entry
Sample output:
CL STRing <string #>
SH STRing
[string_num]
Defines the BOT and EOT strings used in services
If string_num is provided, then the specific string definition and expansion are
displayed. If string_num is not provided, then all string definitions are displayed
without their expansions.
Sample output:
1:
2: \1BE
3: \04
4: \1B%-12345X
5: @PJL
6: ENTER LANGUAGE=
7: PCL\0A
8: POSTSCRIPT\0A
9: \FF\04\FF\05\FF\06\FF\07
10: \FF\04\FF\05\FF\06\FF\08
11: \0C
SH FILters Shows the filters that can modify a job stream
Sample output:
# Filter
0 No Filter
1 Text Substitution
2 AppleTalk