Network Card User's Manual



Page 24 silex Accessing Configuration Parameters

Part Number 40183-101

Table 14 ExtendView System Requirements

Component Requirement -- VERIFY

Personal Computer 133 MHz or higher

Microsoft Windows Operating System 98SE, ME, 2000, XP or 2003

RAM Memory 64 MB or greater

Hard Disk Space 10 MB or greater

CD-ROM Drive

The developer’s kit CD contains the ExtendView Utility software. In addition, you can download the

software from the silex websites.

Installing ExtendView Utility

You can install the ExtendView Utility using the CD contained in your evaluation kit or accessing the

website.

To install ExtendView from CD:

1. Power on the personal computer, then access the network.

2. Connect the SX-550 module to the network using an Ethernet cable.

3. Power on the SX-550 module.

4. Insert the silex CD in the CD-ROM drive of the computer. The CD should display automatically.

If not, click the Windows Start menu, and select Run>Browse, then select the CD. The Browse

window displays.

5. Select Utilities, then ExtendView and select Setup. The Run window displays.

6. Click OK. The InstallShield Wizard displays. The InstallShield Wizard walks through the installation

process.

7. Once install is complete, remove CD from CD-ROM drive.

8. Continue to the Using ExtendView Utility.

OTE: You can also install ExtendView from the silex web site at www.silexamerica.com.