User's Manual
Alpha Networks Proprietary and Confidential Information
8
y Diagnosis
Diagnosis allows you to display all channel status and search neighboring access points
2.3.1 Information
# Feature Detailed Description
2.3.1.1 General
Information
y
General Information shows the name of Wireless Adapter, Adapter
MAC Address, Regulatory Domain, Firmware Version, and Utility
Version.
2.3.1.2 Current Link
Information
y
Current Link Information shows the Current Setting ESSID, Channel
Number, Associated BSSID, Network Type (infrastructure or Ad-hoc
network), WEP Status (enable or disable), Link Status (Connect or
Dis-connect), 802.11g Transmit Speed (6, 9, 12, 18, 24, 36, 48,
54Mbps), 802.11b Transmit Speed (1, 2, 5.5, 11Mbps), Signal
Strength, and Link Quality.
2.3.1.3 Site survey
y
To search the neighboring access points and display the information
of all access points.
2.3.2 Configuration
# Feature Detailed Description
2.3.2.1 ESS ID
y
Input an SSID number if the roaming feature is enabled
y
Supports for ASCII printable characters.
2.3.2.2 Network Type
y
Ad-hoc Mode and 802.11 Ad-hoc Mode for network configurations
that do not have any access points
y
Infrastructure Mode for network configurations with access points
2.3.2.3 Transmission Speed
y
This indicates the communication rates. Select appropriate
transmission speed to match your wireless LAN settings
2.3.2.4 Roaming
y
Support Automatic or Manual Rescan to associate with access point.
2.3.3 Encryption
# Feature Detailed Description
2.3.3.1 Encryption y RC4 encryption algorithm
y Support 64/128 bit WEP encryption
y Support open system and shared key authentication
2.3.3.2 WEP Management y Four WEP keys can be selected
y STA with WEP off will never associate any AP with WEP enabled
y WEP Key Format: Option for Hex format
2.3.3.3 802.1x
y
Support EAP-TLS, EAP-TTLS, and EAP-PEAP
2.3.3.4 WPA/WPA2
y
Support WPA/WPA2-PSK and WPA/WPA2-EAP
y
Support Cipher Mode AES and TKIP
2.4 Mechanical Requirements
# Feature Detailed Description
2.4.1 Length y 57.5mm(PCBA)
2.4.2 Width y 22.6mm(PCBA)
2.4.3 Height y 5.8mm(PCBA)
2.5 Compatibility Requirements
This device passes the following compatibility requirements.
# Feature Detailed Description
2.5.1 Wi-Fi
y
Meet Wi-Fi certification for IEEE 802.11b/g product