User's Manual
Date:March 18, 2016
(9/18)
CONFIDENTIAL
© silex technology, Inc.
Usable channel list
11b Ch.1, Ch.2, Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9, Ch.10, Ch.11
11g Ch.1, Ch.2, Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9, Ch.10, Ch.11
11ng HT20 Ch.1, Ch.2, Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9, Ch.10, Ch.11
11ng HT40 Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9
11a Ch.36, Ch.40, Ch.44, Ch.48, Ch.52, Ch.56, Ch.60, Ch.64
Ch.100, Ch.104, Ch.108, Ch.112, Ch.116, Ch.120, Ch.124, Ch.128, Ch.132, Ch.136, Ch140
Ch.145, Ch.149, Ch.153, Ch.157, Ch.161, Ch.165
11n HT20
11ac VHT20
Ch.36, Ch.40, Ch.44, Ch.48, Ch.52, Ch.56, Ch.60, Ch.64
Ch.100, Ch.104, Ch.108, Ch.112, Ch.116, Ch.120, Ch.124, Ch.128, Ch.132, Ch.136, Ch140
Ch.145, Ch.149, Ch.153, Ch.157, Ch.161, Ch.165
11n HT40
11ac VHT40
Ch.38, Ch.46, Ch.54, Ch.62
Ch.102, Ch.110, Ch.118, Ch.126, Ch.134
Ch.151, Ch.159
11ac VHT80 Ch.42, Ch.58
Ch.106, Ch.122
Ch.155
・Above region code relating channel list is programmed in the module by module manufacturer
(Silex).
・Since programmed region code and channel list is binary data and user cannot know the structure
of program, any customers cannot change usable channels.
Operation theory
Client mode (Station)
Operation frequencies Active/Passive ad-hoc mode
2.4GHz band 11b/g/n 2412-2462MHz Active scan No
W52 11a/an/ac 5180-5240MHz Active scan No
W53 11a/an/ac 5260-5320MHz Passive scan No
W56 11a/an/ac
5500-5700MHz
※IC:5600-5650MHz disable
Passive scan No
W58 11a/an/ac 5745-5825MHz Active scan No
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down through the MAC,
through the digital and analog baseband, and finally to the RF chip. Several special packets
are initiated by the MAC. These are the only ways the digital baseband portion will turn on the
RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter
will be on only while one of the aforementioned packets is being transmitted. In other words,
this device automatically discontinue transmission in case of either absence of information to
transmit or operational failure.