User`s guide

120
SX-AP-4800AN User's Guide
VLAN ID ： 1
Group
AG
roup C
Group B
SSID ： MARKETING
VLAN ID ： 200
SSID ： SALES
VLAN ID ： 100
SSID ： GUEST
SX-AP-4800AN
VLAN HUB
Establish the Virtual Network Groups
The VLAN conguration is completed.
The virtual network groups will be active based on the VLAN ID setting you congured.
- After the VLAN feature is enabled, you will not be able to congure SX-AP-4800AN via the network with
a dierent VLAN ID from management VLAN ID. If you are not sure of the VLAN ID of the management
VLAN, you will need to initialize the settings and recongure SX-AP-4800AN. For how to initialize SX-AP-
4800AN, refer to Chapter 5-7 Maintenance Feature - How to reset SX-AP-4800AN to factory defaults
using the Push Switch.
- To congure SX-AP-4800AN wirelessly from a PC running on VLAN-enabled environment, the VLAN ID
configured to SSID of the wireless LAN must be the same as management VLAN ID. By defaults, the
conguration change via wireless LAN is restricted on SX-AP-4800AN since the Access Control feature is
on. Please change the setting appropriate for your environment.
- For details on each conguration item, refer to A. Appendix - A-1. List of All Settings.
TIP