System information

6Appendix
Users Manual RX
3. Select Create a new port in Select
the Printer Port and create a new
port. Select LPR Port and click Next.
- If the destination print port was
created when installing the PRICOM
R-9100U, select the port from Use
the following port and click Next.
4.At Name or address of server
providing lpd, type in the IP address
which was set to the PRICOM R-
9100U. At Name of printer or print
queue on that server, add lp and click
OK.
5. At Add Printer Wizard, select the
printer driver to be used. Click Next.
6. When Use Existing Driver appears,
select whether to Keep existing
driver (recommended) or Replace
existing driver. Click Next.
NOTE