System information

24Appendix
Users Manual RX
- For Web browser, we recommend Netscape Navigator 4.0 (or higher) or Internet Explorer 4.0
(or higher) version. If a different web browser is used, it must be compatible with HTTP 1.0
(RFC1945) and HTML 2.0 (RFC1866).
- The information may be different depending on the products.
- The PRICOM R-9100U cannot be initially configured using a Web browser.
- When using the Web browser, the TCP/IP protocol must be loaded and an IP address must be
assigned to the PRICOM R-9100U.
- If the firmware version of the PRICOM R-9100U is 2.0.0 or newer, the model name will be
displayed as "R-9100U+."
Type the IP address of the PRICOM R-9100U in the Web browser to open the PRICOM’s
web page.
Example: http://192.168.20.190/
Connecting with the PRICOM R-9100U using a Web browser
Using a Web Browser
The PRICOM R-9100U has HTTP which enables you to check or change the configuration
as well as checking the device status.
If this product was assigned
“192.168.20.190”, enter
[http:// 192.168.20.190/].
- The manual explanations are based on the English screen shot descriptions.
NOTE
TIP